Cultivar Articles - Agricultural Machines

Massey Ferguson

Benefits of haymaking for the producer's pocket

By Lucas Zanetti, Massey Ferguson Product Marketing Manager

04.11.2024 | 14:29 (UTC -3)

Post-harvest care that guarantees coffee quality

By Joana Caroline D'arc de Oliveira, João Pedro Miranda Silvestre, Giovani Belutti Voltolini, Larissa Cocato da Silva and Ademilson de Oliveira Alecrim, from the Federal University of Lavras

01.11.2024 | 16:41 (UTC -3)

How to plan your agricultural fleet for greater efficiency

By Edmo Henrique Martins Cavalcante, Daniel Mariano Leite, Marconi Ribeiro Furtado Junior and Hugo Colombarolli Bonfá, from the Federal University of the São Francisco Valley

28.10.2024 | 16:47 (UTC -3)

Ballasting optimizes traction and reduces operating costs

By Lucas de Arruda Viana, Federal University of Viçosa

24.10.2024 | 16:33 (UTC -3)

Harvesters: speed optimizes consumption and efficiency

By Rafael de Oliveira Faria, Gabriel Araújo e Silva Ferraz, Alan Andrade and Diego Alonso from the Federal University of Lavras

22.10.2024 | 16:48 (UTC -3)

Old

Planter: how to maximize performance in grain planting

Learn how to choose the best planter for your crop. Check out the planting solutions and the advantages of Stara agricultural machines

15.10.2024 | 17:35 (UTC -3)

Fuel of the future: agribusiness on the front line against climate change

By Fernando Silva, commercial coordinator at AGCO Power

10.10.2024 | 09:25 (UTC -3)

Maintenance

The role of the maintenance operator in advanced machine maintenance

By Gessieli Possebom, Catize Brandelero and Valmir Werner, from the Agricultural Machinery Testing Center (Nema) – CCR of the Federal University of Santa Maria (UFSM)

08.10.2024 | 16:45 (UTC -3)

Grain storage: one of the last frontiers in the introduction of new technologies

By Everton Rorato, director of PCE Engenharia

07.10.2024 | 13:25 (UTC -3)

How angle and speed affect losses in mechanized soybean harvesting

By Vandoir Holtz, Jelvonei Darlan Lira and André Maller, from Unemat, and Mateus Prolo Massola, from UEG/UnUCET

02.10.2024 | 16:06 (UTC -3)

agricultural mechanization

Agricultural mechanization management: how to optimize the use of machines in the field

By Mayara Aparecida Gomes, Cezario Benedito Galvão, Daniel Albiero and Angel Pontin Garcia, from the Faculty of Agricultural Engineering/Unicamp

01.10.2024 | 15:11 (UTC -3)

Correct sizing of agricultural machinery increases productivity and reduces costs

By Weslley Buratto, Antonio Tassio Santana Ormond, Alicia Cristino Arenhart, Gessiel Mendonça Leles and Marcos Ferreira do Prado, from Unemat, and Willian Buratto, from UFMT

17.09.2024 | 16:41 (UTC -3)

Combination of tools and adjustments for invisible soil scarification

By Mateus Potrich Bellé, from IFSC Campus São Carlos, Airton dos Santos Alonço, Tiago Rodrigo Francetto, Wagner Pires and Elias Prochnow, all from Laserg - UFSM

10.09.2024 | 17:00 (UTC -3)

The role of CVT transmission in fuel economy and operational efficiency of tractors

By Yasser Alabi Oiole, Leonardo Leonidas Kmiecik, Marcos Cristiano Machioski, Thiago Xavier da Silva and Samir Paulo Jasper, from the Agricultural Tractor Adaptation Laboratory

06.09.2024 | 16:24 (UTC -3)

Efficiency of mechanized harvesting in coffee plantations with central pivot irrigation

By Marcelo Tufaile Cassia and Rouverson Pereira da Silva, from Lamma, Unesp/Jaboticabal, and Alberto Carvalho Filho, from UFV, Rio Paranaíba Campus

06.09.2024 | 15:52 (UTC -3)

Sabri

The influence of flight height on spraying: common mistakes and best practices

By Henrique Campos, from Sabri

05.09.2024 | 15:39 (UTC -3)

SAE BRASIL Agricultural Machinery Symposium

Agribusiness cycles: strategies to ensure the sustainability and competitiveness of the sector

By Rodrigo Junqueira, general manager of AGCO and vice-president Massey Ferguson South America

21.08.2024 | 14:27 (UTC -3)

Mechanical practices for the prevention and correction of degraded soils

By Viviane Castro dos Santos (UFC), Deivielison Ximenes Siqueira Macedo (Fatene), Leonardo de Almeida Monteiro (UFC), Jefferson Auteliano Carvalho Dutra (UFC), Enio Costa (IFCE), and Daniel Albiero (Unicamp)

15.08.2024 | 15:52 (UTC -3)

Cleaning and decontamination challenges in modern sprayers

By Ulisses Delvaz Gandolfo, from Instituto Dashen, and Marco Antonio Gandolfo, from Uenp Campus Luiz Meneghel

12.08.2024 | 17:05 (UTC -3)

Performance evaluation of a honeycomb disc feeder in the distribution of corn seeds

By Airton dos Santos Alonço, Tiago Rodrigo Francetto, Antonio Robson Moreira and Bruno Christiano Correa Ruiz Zart, Laserg/UFSM

09.08.2024 | 15:25 (UTC -3)

Before purchasing: how to choose the right agricultural sprayer?

By Fabiano Griesang, Product Specialist at Jacto

07.08.2024 | 15:13 (UTC -3)

Mechanized planting: comparative study of the use of GNSS systems

By Maíra Laskoski, Julio Soczki, Guilherme Luis Parize, Leonardo Leonidas Kamiecik, Thiago da Silva Xavier and Samir Paulo Jasper, from the Federal University of Paraná

06.08.2024 | 15:38 (UTC -3)

Agricultural machinery leasing model gains traction among farmers

By Fábio Schavinski, from Schavinski PD&I

05.08.2024 | 14:07 (UTC -3)

comparative

Comparison of 12 large tractors sold in Brazil

We put 12 different models of large tractors sold in Brazil face to face, comparing data from official tests carried out at the Tractor Testing Laboratory at the University of Nebraska, in the United States.

03.07.2024 | 15:01 (UTC -3)