Tractors Accuracy without satellites Even without GPS, it is possible to determine the position of sampling points and carry out localized management of the crop. 10.11.2015 | 21:59 (UTC -3)
Tractors Mechanization Challenges The solution to mechanization problems must involve a broad research program. 10.11.2015 | 21:59 (UTC -3)
Tractors Guaranteed performance Computer program developed in Brazil will help evaluate tractors more quickly. 10.11.2015 | 21:59 (UTC -3)
Tractors Listen carefully to your tractor If something is wrong, your tractor will let you know through appearance, noise and even odor. Learn how to identify possible problems. 10.11.2015 | 21:59 (UTC -3)
Quality assured Storing fuel on a farm requires some precautions that, if not taken, could compromise the machinery. 10.11.2015 | 21:59 (UTC -3)
How to understand transmissions See gearbox concepts, terminology and dictionary here. 10.11.2015 | 21:59 (UTC -3)
Eye on the straps Belts in good condition and with proper handling guarantee greater machine performance. 10.11.2015 | 21:59 (UTC -3)
Tractor accidents Poor maintenance of the machine and improvisation to ensure the working day can lead to serious accidents. 10.11.2015 | 21:59 (UTC -3)
The strength of the sunflower Oil extracted from the seed can replace diesel and yield up to 20% more. 10.11.2015 | 21:59 (UTC -3)
The seed germinates Vegetable seed market is expanding. However, some investments still need to be made. 10.11.2015 | 21:59 (UTC -3)
Tractor without Galloping A phenomenon caused by a mismatch between the front and rear axles causes discomfort to the operator and harms the machine. 10.11.2015 | 21:59 (UTC -3)
Fertilizer in the right place Lack of regulation and little knowledge of equipment can lead to a large waste of fertilizers and improvers. 10.11.2015 | 21:59 (UTC -3)
Noise under control Among the various factors related to ergonomics and safety to be observed during the design of an agricultural tractor, visibility and noise exposure conditions deserve to be highlighted. 10.11.2015 | 21:59 (UTC -3)
Mechanized foraging Discover some of the most used machines for cutting, raking and turning forage. 10.11.2015 | 21:59 (UTC -3)
Understanding transmissions - Mission impossible? See here everything about gearbox concepts, terminology and dictionary. 10.11.2015 | 21:59 (UTC -3)
All about gasoline Knowing the type of gasoline that goes into your car's tank can be the first step to having good performance on the road. 10.11.2015 | 21:59 (UTC -3)
Tire makes the difference When buying a tire for your tractor, you need to know where you will use it. 10.11.2015 | 21:59 (UTC -3)
Exchange time Prolonging the use of oil in the tractor engine crankcase, in an attempt to save time and money, could actually be the beginning of a more serious problem. 10.11.2015 | 21:59 (UTC -3)
Selection Criteria See here expert tips for choosing a new agricultural machine. Decision-making is not simple, as a major error can leave the rural producer in debt. 10.11.2015 | 21:59 (UTC -3)
Fertilizing machines Learn about some constructive aspects of fertilizer and solid amendment distributors, which must be observed to obtain the best possible performance from the machine. 10.11.2015 | 21:59 (UTC -3)
Rural accidents Excessive confidence, recklessness and informal training are some of the main factors responsible for the large number of accidents with agricultural machinery. 10.11.2015 | 21:59 (UTC -3)
In search of precision Some care must be taken when analyzing the mappings generated in precision agriculture, since, for example, two plots with low productivity in the same crop may have causes in combination of different f 10.11.2015 | 21:59 (UTC -3)
Deafening noise Study shows the noise in tractors and agricultural implements and the risk of hearing loss for operators of these machines. In a first survey, an average noise level for national tractors was found to be 97 dec 10.11.2015 | 21:59 (UTC -3)
On the water The airboat, the latest innovation for the application of aquatic herbicides, has electronic systems for control and monitoring in dams 10.11.2015 | 21:59 (UTC -3)
Selection criteria II When defining the model that should be purchased, it is not enough to take into account only the market value. Some criteria with after-sales and operating costs of the equipment must also be observed. 10.11.2015 | 21:59 (UTC -3)
Proper storage When storing lubricants on the farm, it is necessary to observe some precautions to avoid loss of the product. 10.11.2015 | 21:59 (UTC -3)
Virtual implement The virtual implement is a tractor set equipped for precision agriculture, with a DGPS or GPS system, sensors, Datavision Monitor and a non-monitored implement, where control is done based on the performance of the tract. 10.11.2015 | 21:59 (UTC -3)
With the right weight Adequate ballast depends on several factors, including respecting the tire's load capacity and the machine's weight distribution. 10.11.2015 | 21:59 (UTC -3)